New car club.. HAMS!!

[JDMGTI]

anyone interested?

looking for guys who know stuff, and dont mind sharing your skills.

and if your willing to learn, I mean getting dirty, messing up your clothes, that kind of stuff willingness.. perhaps we may start a club.

H.a.m.s
half ass motor sports.

jdm pig logo, with HAMS underneath it.

I think its funny.. used have a club back in the late 90s called PHAT FUK RACING

or PFR for short.. lots of fun, lots of swaps and stuff too

there will be a math test, and some a multiple choice quiz, so be prepared.

really open to hondas/acuras from 88/90 to 00/01 I personally don't know much about cars other than those.

oh ya, and you must have a good sense of humor! 'cuz eVERYONE is gonna make fun of us.

need to be at least 18yrs old (legal stuff)

[iblubyu]

Oh god.. lol

[dizo]

"there will be a math test, and some a multiple choice quiz, so be prepared."


this is the best part hahaha

[mmpavementndirt]

im so gonna join

[an0ther EG]

"there will be a math test, and some a multiple choice quiz, so be prepared."


this is the best part hahaha

LOL I wonder how many will fail haha

[INT3GR@]

LOL I wonder how many will fail haha

I WANNA DO THAT TEST HEHE

[INT3GR@]

AWWW ****T I FORGOT I DONT HAVE A HONDA ANYMORE LOL AWD TALON

CAN I STILL DOIT..?? IS STILL A JAPANESE CAR!!

[iblubyu]

AWWW ****T I FORGOT I DONT HAVE A HONDA ANYMORE LOL AWD TALON

CAN I STILL DOIT..?? IS STILL A JAPANESE CAR!!

We don't want you here.

[psychobear]

We don't want you here.

LOL'Z..... I'll be down to be in HAMS

[civy28]

wow....it never ends lol

[JDMGTI]

AWWW ****T I FORGOT I DONT HAVE A HONDA ANYMORE LOL AWD TALON

CAN I STILL DOIT..?? IS STILL A JAPANESE CAR!!

I see the apples don't fall far from the tree...

ok here is an example of a queston..

describe what the LMAs do in a honda motor, or any motor that uses LMAs (toyota, mitsu, vw, etc..)
a.) whats a LMA?
b.) huh?
c.) its a Lower Master Assembly
d.) it's very important
e.) your answer here...

[hatchy92]

Damn I will fail this test

[TheButcher]

I see the apples don't fall far from the tree...

ok here is an example of a queston..

describe what the LMAs do in a honda motor, or any motor that uses LMAs (toyota, mitsu, vw, etc..)
a.) whats a LMA?
b.) huh?
c.) its a Lower Master Assembly
d.) it's very important
e.) your answer here...

Is that short for Llama?

[INT3GR@]

We don't want you here.

I see the apples don't fall far from the tree...

ok here is an example of a queston..

describe what the LMAs do in a honda motor, or any motor that uses LMAs (toyota, mitsu, vw, etc..)
a.) whats a LMA?
b.) huh?
c.) its a Lower Master Assembly
d.) it's very important
e.) your answer here...

Lost Motion Assembly
they basically provide constant pressure to the rocker arm that the vtec lobe travels on. as for the reasons to why this is necessary i have no deffinitive answer but its fairly obvious. when you are not in vtec and the rockers are not bridged together with the locking pins the rocker arm that the vtec lobe rides on basically just sits there. without the lost motion assembly the rocker would just sink or most likely fling itself around from vibration. so this item, the lost motion assembly sits underneath of the vtec rocker arm and keeps it held up so the vtec lobe on the cam can ride on it. i would also assume that without this device in there and the rocker arm being either sunk or flinging around it would be alot harder for the pins to slide and bridge the rockers for vtec operation. i would also assume from just looking at the design that by keeping the rocker suspended and allowing the lobe to ride on it would help balance centrifical stress.

[JDMGTI]

very good grammar, kinda like a cut and paste google search. (judging by your grammar in previous messages, it doesn't look like your reply was in your own words..)

but thats OK!

good luck googling in person.

I'm just looking for people who are smarter than they appear to be. not just the ones looking to circle around taking pieces for thier own nest.

wheres the butcher at? I need to go to meat shop and get my head cut off..